iTAG Solutions AS - Stortorvet 10 - 0155 OSLO - NORWAY - + 47 6280 9900 - post@itagsolutions.no - www.itagsolutions.no

©2019 by iTAG Solutions AS

Fixed RFID Readers & Antennas

Below is a selection of fixed RFID readers. iTAG represents the vast majority of quality suppliers, and depending on the individual customer's needs, we recommend the right solution for the task. Our portfolio includes suppliers such as SICK, Kathrein, Impinj and Zebra.

SICK RFU 630 leser/antenne

  • "Long range" RFID UHF reader

  • Writing / reading device with integrated antenna

  • Output power 2 W (ERP, with integrated antenna, alternatively 30 dBm at external antenna port, output power adjustable)

  • RFID standard EPCglobal UHF Class 1 Generation 2, ISO / IEC 18000-6 C

  • Scanning area ≤ 10 m (depending on chip and environment)

  • Integrated antenna (circular polarized, axial ration type. 2 dB, 72 ° field opening, front and rear ratios> 17 dB), in addition 3 external antenna ports

  • Service features: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620

  • Other features: Cloning function (microSD memory card or system), diagnostics, update firmware, freely programmable data output format, triggering.

SICK RFU620 leser/antenne

  • Mid Range version

  • Product category Writing / reading unit with integrated antenna

  • Output power 0.25 W (ERP, 24 dBm)

  • RFID standard EPCglobal UHF Class 1 Generation 2, ISO / IEC 18000-6 C
    Connection type Ethernet

  • Scanning area ≤ 2 m (depending on RFID chip and environment)

  • Antenna Integrated (circular polarized, axial ration type. 2 dB, 100 ° field opening, front and rear ratios> 7 dB)

  • Service features: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620

  • Other features: Cloning function (microSD memory card or system), diagnosis, update firmware, freely programmable data output format, triggering, SICK AppSpace functionality can be activated with SD card accessories SDK6U-P00100 (for firmware ≥ 2.0.0)

SICK RFA 630 antenna

  • Long range version

  • Output power Max. 2W (ERP)

  • Polarization Circular polarized / RHCP

  • Voltage standard wave ratio <1.2

  • Gain Type. 9 dBic

  • 3 dB aperture type. <72 °

  • Axial ratio Type. <2 dB

  • Front-to-rear ratio Type. > 17 dB

  • Weight 3,000 g

  • Aluminum

  • Polycarbonate (front)

  • Degree of protection IP67

  • Dimensions (W x H x L) 238.6 mm x 64.3 mm x 238.6 mm

  • Ambient temperature -25 ° C ... +50 ° C

  • Storage temperature -30 ° C ... +70 ° C

  • Permissible relative humidity 95%, Not condensing

SICK RFA 620 antenna

  • Long range version

  • Output power 2 W (ERP)

  • Polarization Circular polarized / RHCP

  • Gain Type. 4.7 dBic

  • 3 dB aperture type. 95 °

  • Axial ratio Type. <2 dB

  • Front-to-rear ratio Type. > 12 dB

  • Weight 490 g

  • Aluminum

  • Polycarbonate (front)

  • Degree of protection IP67

  • Dimensions (W x H x L) 125.9 mm x 170.5 mm x 35.1 mm

  • Ambient temperature -25 ° C ... +50 ° C

  • Storage temperature -30 ° C ... +70 ° C

  • Permissible relative humidity 95%, Not condensing

ZEBRA FX 630 UHF RFID READER

The FX9600 provides a new level of cost-effectiveness to passive UHF activity tracking and asset control without compromising performance. You get all the features you need to achieve maximum visibility and efficiency in high volume environments and robustness requirements - from industry-leading read speeds and exceptional read accuracy to superior RF sensitivity. When only the industry's best RFID performance will do, the FX9600 delivers.

ZEBRA AN 480 UHF RFID ANTENNA

The AN480 single port antenna provides maximum performance and flexibility. The low axial ratio is nearly 50 percent lower than typical competing units, giving a more even effect - and better performance. The wide frequency range allows this antenna to be utilized in worldwide deployment, providing cost efficiency and a simplified RFID infrastructure. AN480 can be installed throughout the enterprise in production and storage environments. As with all Zebra antennas, the AN480 uses Zebras standard mounting bracket - mounting the antenna for the first time or upgrading an existing Zebra antenna with the AN480 is fast and easy.

 

  • Material: Aluminum with plastic cover

  • Polarization: R & L circular

  • IP class 54

  • Weight: 1.13 kg

  • Dimensions: 25.9 x 25.9 x 3.4 cm

  • Min / max temperature: -25ºC to 70ºC

ZEBRA AN 720 UHF RFID ANTENNA

The Zebra AN720 is a compact antenna that is aesthetically pleasing and has a high IP class 67 which makes it suitable for indoor or outdoor use. The AN720 antenna offers all the features required for any environment. A perfect complement to Zebra's FX6700 RFID Reader, the AN720 antenna is extremely compact, providing the design required for the most discreet installation in the most limited areas. The integrated mounting bracket makes it easy to install in minutes. The rugged AN720 is designed to withstand exposure to rain, snow and extreme temperatures.

 

  • Material: Aluminum with plastic cover

  • Polarization: L circular

  • IP class 67

  • Weight: 0.37 kg

  • Dimensions: 13.3 x 13.3 x 1.8 cm

  • Min / max temperature: -25ºC to 70ºC

PEPPERL & FUCHS ATEX zone 1 box

Solution for using fixed readers in areas with ATEX zone 1 requirements.